Quarter Frame > Ox End Dump Trailers

Overview

Designed for long-term reliability and profitability our quarter frame trailer is great for asphalt applications when dumping into pavers or where lighter weight trailers are required for mid-range haul distances.

Three body styles in Elliptical "U", "J" & Square Bottom "L"
Widths of 96" & 102"
Lengths of 22'-28'
Capacities up to 39.8 cubic yards
Continuous seam-welded design
Handles sand-to-large aggregates, riprap, and asphalt

Features

Dimensions for Elliptical "U", "J" & Square Bottom "L" Body:

96" Wide / 84" Inside
Lengths of 22'-28'
Side heights of 36"-60" (in 6" increments)
Tailgate height 6" higher than sides
18-33.4 Cubic Yard Capacity (Elliptical "U" only)
17-26.2 Cubic Yard Capacity ("J" only)
17-39.8 Cubic Yard Capacity (Square Bottom "L" only)
2 Year Warranty

Standard Features for Elliptical "U" Body:

3/16" high-tensile steel bulkhead and hoist well
Conventional 7 gauge high-tensile steel, air-operated tailgate
Recessed/rubber grommet mounted LED lighting for side body, tail, clearance, and back up lights to meet Federal Standard 108
Heavy-duty hinges with 2-1/2" diameter CR pin and 1/8" NPT grease zerks
8" diameter, telescoping hoist
Continuous seam-welded design
Rubber flaps, front corner mounted
36" anti-sail, rear rubber mud flaps
Drop-leg landing gear
Single point-tandem suspension
2S/1M ABS braking system
Steel disc 22.5 x 8.25 wheels with 11R22.5 LRG, 14-ply tires
Epoxy primer and polyurethane top coat (chassis standard color is black)

The Elliptical "U", "J" & Square Bottom "L" have many of the same optional features with these key differences:

For Elliptical "U" Body:

3/16" Hardox AR450 steel used for sides with 1/4" Hardox AR450 floor UU
10 gauge high-tensile steel sides
Cross-memberless, 10" I-Beam longsill with Flex Inhibitors

For "J" Body:

10 gauge high-tensile steel sides
3/16" high-tensile steel floor
Cross-memberless, 10" I-Beam longsill with Flex Inhibitors

For Square Bottom "L" Body:

Vertical line posts with high-tensile steel sides
10 gauge high-tensile steel sides
3/16" high-tensile steel floor
Stacked, 4" structural cross-member with 6" I-Beam longsill

Options

Base Options:

For Elliptical "U", "J" & Square Bottom "L" Body:

102" body width
Sloped front in 3/16" or 1/4" AR450 Hardox steel with external hoist mount
Two way, side swing, and High-Lift tailgates
Tailgate coal chute (maximum of three)
Sealed tailgate kit
6" or 8" side boards in metal or wood
Full body height exterior/internal ladder located front driver's side
Dirt-shedding angle for side top rail, tailgate, and hoist well
Semi-auto or electric flip tarps, cable systems, or side roll tarps with choice of mesh or vinyl covers
Additional recessed/rubber grommet mounted LED lighting for sides and rear facing in rear posts to meet Federal Standard 108
In-cab wet line system/mounted control panel for hoist, tailgate, and tarp
Additional air tank for increased capacity
Under body vibrator
Rubber flaps with anti-sail brackets or steel gravel guards for mount in front of suspension
2-speed landing gear
Air ride tandem axle available for all lengths
4S/2M ABS braking system
Steel disc wheels: 22.5 x 8.25 or 24.5 x 8.25 in multi-tire configurations
Aluminum disc wheels: 22.5 x 8.25 or 24.5 x 8.25 in multi-tire configurations
Custom paint colors